ExamTopics Logo
Mail Us[email protected]
Menu
Netapp Discussions
exam questions

Exam NS0-191 All Questions

View all questions & answers for the NS0-191 exam
Go to Exam

Exam NS0-191 topic 1 question 13 discussion

Actual exam question from Netapp's NS0-191
Question #: 13
Topic #: 1
[All NS0-191 Questions]

A customer has replaced both interconnect cables on a FAS3240 HA pair with IOXM because they were damaged. After replacing the cables, the customer receives the error shown below.
"HA interconnect port 1 of this appliance seems to be connected to port 2 on the partner appliance".
In this scenario what is the cause of this error?

  • A. The interconnect cables must not be replaced while the controllers are up and running.
  • B. c0a and c0b are 10Gbit Ethernet ports which must not be used for the interconnect.
  • C. The interconnects are cross-cabled, you must connect c0a with c0a and cob with c0b.
  • D. You must issue the ifconfig down… command followed by the ifconfig up … command for both ports, on both controllers, after replacing the cables.
Show Suggested Answer Hide Answer
Suggested Answer: C 🗳️
Reference:
https://library.netapp.com/ecmdocs/ECMP1196905/html/GUID-0DD9C0E6-638F-4D6E-8486-8C8EFC702299.html
by cecomavu at April 5, 2025, 12:27 p.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
Currently there are no comments in this discussion, be the first to comment!
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago