Exam PCNSE All Questions

View all questions & answers for the PCNSE exam

Exam PCNSE topic 1 question 206 discussion

Actual exam question from Palo Alto Networks's PCNSE

Question #: 206
Topic #: 1

Given the following configuration, which route is used for destination 10.10.0.4? set network virtual-router 2 routing-table ip static-route "Route 1" nexthop ip-address 192.168.1.2 set network virtual-router 2 routing-table ip static-route "Route 1" metric 30 set network virtual-router 2 routing-table ip static-route "Route 1" destination 10.10.0.0/24 set network virtual-router 2 routing-table ip static-route "Route 1" re route-table unicast set network virtual-router 2 routing-table ip static-route "Route 2" nexthop ip-address 192.168.1.2 set network virtual-router 2 routing-table ip static-route "Route 2" metric 20 set network virtual-router 2 routing-table ip static-route "Route 2" destination 10.10.0.0/24 set network virtual-router 2 routing-table ip static-route "Route 2" route-table unicast set network virtual-router 2 routing-table ip static-route "Route 3" nexthop ip-address 10.10.20.1 set network virtual-router 2 routing-table ip static-route "Route 3" metric 5 set network virtual-router 2 routing-table ip static-route "Route 3" destination 0.0.0.0/0 set network virtual-router 2 routing-table ip static-route "Route 3" route-table unicast set network virtual-router 2 routing-table ip static-route "Route 4" nexthop ip-address 192.168.1.2 set network virtual-router 2 routing-table ip static-route "Route 4" metric 10 set network virtual-router 2 routing-table ip static-route "Route 4" destination 10.10.1.0/25 set network virtual-router 2 routing-table ip static-route "Route 4" route-table unicast

A. Route 1
B. Route 3
C. Route 2
D. Route 4

Show Suggested Answer

Suggested Answer: C 🗳️

by Jheax at April 30, 2022, 5:15 p.m.

Comments

Submit Cancel

Whizdhum

1 year, 7 months ago

Answer is C. It would be easier to format the configuration line-by-line, so that the four options are shown clearly. Nevertheless, I was able to sift through the jumbled configuration and find the answer.

upvoted 1 times

...

Knowledge33

2 years, 2 months ago

Selected Answer: C

Longuest mask first, then lowest metric is longuest mask is concurrent.

upvoted 1 times

...

mbhuyan

2 years, 5 months ago

Selected Answer: C

Opps my bed..the answer is C... longest has the different destination which is 10.10.1.0/25 I thought its 10.10.0.0/25.

upvoted 1 times

...

mbhuyan

2 years, 5 months ago

Selected Answer: D

Longest match is 10.10.0.4 /25 which has the higher priority than /24. So the answer is D, not C

upvoted 1 times

hcir

1 year, 1 month ago

mate, 10.10.1.0/25 matches 10.10.1.(0-127)

upvoted 4 times

...

djedeen

2 years, 8 months ago

Route 3 has the lowest metric, but 1 & 2 are longer match than its 0.0.0.0/0 destination.

upvoted 1 times

...

Pakawat

3 years ago

Prefer route 2 with lowest metric

upvoted 2 times

secdaddy

2 years, 12 months ago

longest match. lowest metric only comes into play if there is more than one route with the same length match.

upvoted 3 times

...

Jheax

3 years, 3 months ago

Selected Answer: C

This is the line that you want to pay attention to answer this question: set network virtual-router 2 routing-table ip static-route "Route 2" destination 10.10.0.0/24

upvoted 2 times

...