Welcome to ExamTopics
ExamTopics Logo
- Expert Verified, Online, Free.

Unlimited Access

Get Unlimited Contributor Access to the all ExamTopics Exams!
Take advantage of PDF Files for 1000+ Exams along with community discussions and pass IT Certification Exams Easily.

Exam OG0-092 topic 1 question 11 discussion

Actual exam question from The Open Group's OG0-092
Question #: 11
Topic #: 1
[All OG0-092 Questions]

Scenario: Vittronics Ltd.
Vittronics Ltd. is a leading medical device manufacturer in the highly competitive market for Migraine Headache Pain Management (MHPM) devices. These tiny wireless devices are implanted in the brain and can deliver a precise electric shock when the wearable Pain Control Unit (PCU) detects an increase in stress induced by the onset of a migraine headache.
This technology will be a breakthrough in the treatment of this condition, and several competitors are striving to be the first to introduce a product into the market.
However, all of them must demonstrate the effectiveness and safety of their products in a set of clinical trials that will satisfy the regulatory requirements of the countries in the target markets.
The Enterprise Architecture group at Vittronics has been engaged in an architecture development project to create a Secure Private Immersive Collaborative
Environment (SPICE) that will allow researchers at its product development laboratories worldwide to share information about their independent clinical trials.
The Vittronics Enterprise Architecture group is a mature organization that has been utilizing TOGAF for several years. They have recently upgraded to TOGAF 9.
The Vittronics Architecture Development Method (VADM) is strictly based on the TOGAF 9 Architecture Development Method (ADM) with extensions required to support current good manufacturing practices and good laboratory practices in their target markets.
The SPICE project team has now completed the Business, Information Systems, and Technology Architecture phases and has produced a complete set of deliverables for each phase. Due to the highly sensitive nature of the information that is managed in SPICE, special care was taken to ensure that each architecture domain included an examination of the security and privacy issues that are relevant for each domain. A corresponding SPICE Security Architecture has been defined.
The Executive Vice President for Clinical Research is the sponsor of the Enterprise Architecture activity. He has stated that the changes to the SPICE architecture will need to be rolled out on a geographic basis that will minimize disruptions to ongoing clinical trials. The work will need to be done in stages and rolled out in geographical regions.
You are serving as the Lead Architect for the SPICE project team.
You have been asked to recommend the approach to identify the work packages that will be included in the Transition Architecture(s).
Based en TOGAF 9, which of the following is the best answer?

  • A. Create an Implementation Factor Assessment and Deduction Matrix and a Consolidated Gaps, Solutions and Dependencies Matrix. For each gap, identify a proposed solution and classify it as new development, purchased solution, or based on an existing product. Group similar solutions together to form work packages. Identify dependencies between work packages factoring in the clinical trial schedules. Regroup the packages into a set of Capability Increments scheduled into a series of Transition Architectures and documented in an Architecture Definition Increments Table.
  • B. Determine the set of Solution Building Blocks required by identifying which Solution Building Blocks need to be developed and which need to be procured. Eliminate any duplicate building blocks. Group the remaining Solution Building Blocks together to create the work packages using a CRLO matrix. Rank the work packages in terms of cost and select the most cost-effective options for inclusion in a series of Transition Architectures. Schedule the roll out of the work packages to be sequential across the geographic regions.
  • C. Use a Consolidated Gaps, Solutions and Dependencies Matrix as a planning tool. For each gap classify whether the solution is either a new development, purchased solution, or based on an existing product. Group the similar solutions together to define the work packages. Regroup the work packages into a set of Capability Increments to transition to the Target Architecture taking into account the schedule for clinical trials.
  • D. Group the Solution Building Blocks from a Consolidated Gaps, Solutions and Dependencies Matrix into a set of work packages. Using the matrix as a planning tool, regroup the work packages to account for dependencies. Sequence the work packages into the Capability Increments needed to achieve the Target Architecture. Schedule the rollout one region at a time. Document the progression of the enterprise architecture using an Enterprise Architecture State Evolution table.
Show Suggested Answer Hide Answer
Suggested Answer: A 🗳️

Comments

Chosen Answer:
This is a voting comment (?) , you can switch to a simple comment.
Switch to a voting comment New
sameersoftyhcl
Highly Voted 2 years, 10 months ago
I think A is the correct answer. 1. Should minimize the IMPACT to ongoing trial -> Implementation Factor & Deduction Matrix 2. The work will need to be done in STAGES and rolled out in geographical regions -> Architecture Definition Increments Table 12.3.9: Using the Consolidated Gaps, Solutions, and Dependencies matrix together with the Implementation Factor Assessment and Deduction matrix, logically group the various activities into work packages.
upvoted 9 times
tushmish
1 year, 11 months ago
all good, except 'Architecture Definition Increments Table' isn't part of Phase E, where the work packages get identified.
upvoted 1 times
...
...
PratsMic
Most Recent 10 months, 1 week ago
A - Best B - Missing Gap Analysis C - misses Implementation Factor Assessment and Deduction Matrix that A has D - Missing Gap Analysis
upvoted 2 times
...
93madox
1 year, 1 month ago
Selected Answer: A
I think it is A. Question is asking about Identification of Work Packages, not the transition architectures by themselves. That means we are in the 12.3.9 Indetify and Group Major Work Packages sections that says: Using the Consolidated Gaps, Solutions, and Dependencies matrix together with the Implementation Factor Assessment and Deduction matrix, logically group the various activities into work packages. Indicate for every gap/activity whether the solution should be oriented towards a new development, or be based on an existing product, and/or use a solution that can be purchased.
upvoted 2 times
...
clementi
1 year, 2 months ago
Selected Answer: A
The answer explains in detail the techniques to group the work packages and the transitions architectures
upvoted 1 times
...
rkustagi
1 year, 11 months ago
Selected Answer: A
Choice A is correct sameersoftyhcl has given good explanation
upvoted 1 times
...
scuzzy2010
2 years, 5 months ago
I think it's C. A is close but there's no requirement for Transition Architectures.
upvoted 1 times
scuzzy2010
2 years, 5 months ago
After reading the question again, I think answer is C. It does mention Transition Architectures - " identify the work packages that will be included in the Transition Architecture(s)".
upvoted 1 times
scuzzy2010
2 years, 5 months ago
I mean answer is 'A'!
upvoted 1 times
...
...
...
mrg998
2 years, 10 months ago
Its C, 24.2 says use it as a planning tool.
upvoted 2 times
...
Sixty
3 years ago
C seems to fit better with the standard 24.2 "This matrix can be used as a planning tool when creating work packages. The identified dependencies will drive the creation of projects and migration planning in Phases E and F."
upvoted 3 times
...
sammy811
3 years, 1 month ago
Its C - pg 240
upvoted 3 times
...
mjdfreeiotcloud
3 years, 3 months ago
C for me is the correcte answers, just about work package and not "factors impacting "
upvoted 3 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
Loading ...