Exam 2V0-41.23 topic 1 question 24 discussion

Actual exam question from VMware's 2V0-41.23

Question #: 24
Topic #: 1

A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. An NSX administrator used the get gateways command to retrieve this information:

Which two commands must be executed to check BGP neighbor status? (Choose two.)

A. vrf 3
B. sa-nsxedge-01(tier1_sr)> get bgp neighbor
C. vrf 4
D. sa-nsxedge-01(tier0_dr)> get bgp neighbor
E. vrf 1
F. sa-nsxedge-01(tier0_sr)> get bgp neighbor

Show Suggested Answer

Suggested Answer: AF 🗳️

by Lehua at Oct. 18, 2023, 11:44 a.m.

Comments

Submit Cancel

TheNorthernGeek

7 months, 1 week ago

Selected Answer: AF

https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-9554C339-69DE-4C97-8392-DCCA67682B35.html

upvoted 1 times

...

stjwh1

1 year, 6 months ago

AF correct!

upvoted 1 times

...

kznishida1001

1 year, 6 months ago

Selected Answer: AF

A. vrf 3 F. sa-nsxedge-01(tier0_sr)> get bgp neighbor

upvoted 1 times

...

Trainocate123

1 year, 8 months ago

Confirm thru lab with NSX lab guide : Review the Routing Tables in Each VRF. You need to enter into the VRF context for service router in tier 0

upvoted 1 times

...

Lehua

1 year, 8 months ago

A and F BGP will be configured on the T0 SR. Connect to the VRF for the T0 SR and run get bgp neighbor once connected to it. https://docs.vmware.com/en/VMware-Validated-Design/5.1/sddc-deployment-of-vmware-nsx-t-workload-domains-with-multiple-availability-zones/GUID-8BD4228A-75C6-4C60-80B4-538D4297E11A.html

upvoted 4 times

...