Welcome to ExamTopics
ExamTopics Logo
- Expert Verified, Online, Free.

Unlimited Access

Get Unlimited Contributor Access to the all ExamTopics Exams!
Take advantage of PDF Files for 1000+ Exams along with community discussions and pass IT Certification Exams Easily.

Exam 2V0-41.20 topic 1 question 14 discussion

Actual exam question from VMware's 2V0-41.20
Question #: 14
Topic #: 1
[All 2V0-41.20 Questions]

What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN-backed logical switch?

  • A. Service interface
  • B. Loopback Router Port
  • C. Downlink interface
  • D. VLAN Uplink
Show Suggested Answer Hide Answer
Suggested Answer: A 🗳️

Comments

Chosen Answer:
This is a voting comment (?) , you can switch to a simple comment.
Switch to a voting comment New
diegof1
Highly Voted 3 years, 5 months ago
A is correct, "The service interface is a special-purpose port to enable services for mainly VLAN-based networks. North-south service insertion is another use case that requires a service interface to connect a partner appliance and redirect north-south traffic for partner services. Service interfaces are supported on both active-standby Tier-0 logical routers and Tier-1 routers. Firewall, NAT, and VPNs are supported on this interface. The service interface is also a downlink" . Take from NSX-T ICM 3.0 Lecture Manual.
upvoted 22 times
...
m4ttg
Most Recent 11 months, 2 weeks ago
Service interface is used for VLAN backed segments.
upvoted 1 times
...
WOP_TO
1 year, 9 months ago
A is correct
upvoted 1 times
...
Kof_81
1 year, 10 months ago
Answer is A as per the below: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-3F163DEE-1EE6-4D80-BEBF-8D109FDB577C.html On a tier-0 or tier-1 logical router, you can configure different types of ports. One type is called centralized service port (CSP). You must configure a CSP on a tier-0 logical router in active-standby mode or a tier-1 logical router to connect to a VLAN-backed logical switch, or to create a standalone tier-1 logical router. A CSP supports the following services on a tier-0 logical router in active-standby mode or a tier-1 logical router: NAT Load balancing Stateful firewall VPN (IPsec and L2VPN)
upvoted 1 times
...
Lazylinux
2 years, 2 months ago
Selected Answer: A
Correct one
upvoted 1 times
...
vExpert30
2 years, 3 months ago
The service interface is a special interface for VLAN-based services and partner service redirection
upvoted 1 times
...
air_z9
2 years, 3 months ago
Selected Answer: A
A is correct
upvoted 2 times
...
Hill666
2 years, 3 months ago
Service interface is correct
upvoted 1 times
...
Hill666
2 years, 3 months ago
A is correct
upvoted 1 times
...
sbeauchamp72
3 years, 2 months ago
A is correct from lecture book: Please refer to page 213-214 section 5-19 of the ICM training guide.
upvoted 3 times
ay2801
2 years, 5 months ago
please could you email me a copy of the ICM training guide?
upvoted 2 times
...
...
MinaSyrian
3 years, 4 months ago
A is correct from lecture book "The service interface is a special-purpose port to enable services for mainly VLAN-based networks. North-south service insertion is another use case that requires a service interface to connect a partner appliance and redirect north-south traffic for partner services. Service interfaces are supported on both active-standby Tier-0 logical routers and Tier-1 routers. Firewall, NAT, and VPNs are supported on this interface. The service interface is also a downlink"
upvoted 4 times
...
suresh_40
3 years, 4 months ago
Answer: A is correct https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-BB4D26AD-AF81-4B7C-AA4A-366AEF6F79D2.html
upvoted 4 times
...
gogo1
3 years, 5 months ago
Definitely not A. It might be D?
upvoted 3 times
Praveen2929
2 years, 4 months ago
Yes i also suspect that, above explantions are for NAT, Firewall and VPN's. But here ask is that, what we need to configure on Tier 0... Need to discuss more on this
upvoted 1 times
...
Angegardien
1 year, 6 months ago
might be. but consider that a service interface is also a downlink interface
upvoted 1 times
...
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
Loading ...