Welcome to ExamTopics
ExamTopics Logo
- Expert Verified, Online, Free.

Cisco 300-175 Exam Actual Questions

The questions for 300-175 were last updated on Sept. 26, 2023.
  • Viewing page 1 out of 48 pages.
  • Viewing questions 1-5 out of 247 questions

Topic 1 - Single Topic

Question #1 Topic 1

When a configuration change requires a reboot, which policy specifies how Cisco UCS manager should proceed?

  • A. host firmware policy
  • B. local disk policy
  • C. maintenance policy
  • D. boot policy
Reveal Solution Hide Solution   Discussion  

Correct Answer: C 🗳️
Use the Maintenance Policy to specify how Cisco UCS Manager should proceed for configuration changes that will have a service impact or require a server reboot. Values for the Maintenance Policy can be "immediate", "user-ack", or "timer automatic". The best practice is to not use the "default" policy, and instead to create and use Maintenance Policies for either "user- ack" or "timer automatic", and to always have these as elements of the Service Profile or Service Profile
Template definition. http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-manager/whitepaper_c11-697337.html

Question #2 Topic 1

You are creating service profiles for a Cisco UCS system by using the service profile wizard. You discover that you forgot to create the UUID pool.
What should you do?

  • A. From the wizard, click Create UUID Suffix Pool.
  • B. Pause the running wizard, and then start a temporary wizard to create a profile with the same name and the missing UUID pool. Resume the wizard, and then select the new UUID pool.
  • C. Continue running the wizard. The service profile uses the burned-in UUID in the BIOS of the server.
  • D. Stop the wizard, and then restart the wizard.
Reveal Solution Hide Solution   Discussion  

Correct Answer: A 🗳️
Step 4 -
(Optional) If you want to create a new UUID Suffix pool to use in this service profile, click Create UUID Suffix Pool and complete the fields in the Create UUID
Suffix Pool wizard.
For more information, see Creating a UUID Suffix Pool.

Question #3 Topic 1

Which two features in Cisco UCS Manager are required to configure Uplink Ethernet ports? (Choose two.)

  • A. vNIC templates
  • B. LAN Pin Groups
  • C. VLAN groups
  • D. adapter policies
  • E. link profiles
Reveal Solution Hide Solution   Discussion  

Correct Answer: AB 🗳️
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-6120xp-20-port-fabric-interconnect/110267-ucs-uplink-ethernet- connection.html#configUplinkEthernet https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/ using_the_lan_uplinks_manager.html

Question #4 Topic 1

You need to design and implement a Cisco UCS 5108 Blade Server Chassis system for a customer.
Which statement about how half-width blades and full-width blades can be used is true?

  • A. Only two full-width blades can be installed in the top two slots, and four half-width blades can be installed in the bottom two slots.
  • B. Only one full-width blade can be installed in the top slot, and six half-width blades can be installed in the bottom slots.
  • C. Half-width blades and full-width blades can be combined in any order.
  • D. Half-width blade types and full-width blade types cannot be combined.
Reveal Solution Hide Solution   Discussion  

Correct Answer: C 🗳️
Mixed blade configurations -
Allows up to 8 half-width or 4 full-width blade servers, or any combination thereof, for outstanding flexibility. When configured with the 6324 Fabric Interconnect, only 8 half-width B200 M3 blades are supported. https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/chassis-install-guide/ucs5108_install/ucs5108_install_chapter_01.htm

Question #5 Topic 1

Which destination(s) are valid for syslog messages for a Cisco UCS Fabric Interconnect?

  • A. the log, the monitor and syslog queue
  • B. a file
  • C. the console and log only
  • D. the console, the monitor, and a file
Reveal Solution Hide Solution   Discussion  

Correct Answer: D 🗳️
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/ucsm_syslog/b_Monitoring_Cisco_UCSM_Using_Syslog/ b_Monitoring_Cisco_UCSM_Using_Syslog_chapter_010.html

Community vote distribution
A (35%)
C (25%)
B (20%)
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

Loading ...