Exam 350-601 topic 1 question 452 discussion

Actual exam question from Cisco's 350-601

Question #: 452
Topic #: 1

DRAG DROP
-

Refer to the exhibit. An engineer implements a dynamically negotiated LACP port channel on SW1. The port channel members must be configured as active/standby ports with Eth1/2 as active and Eth1/1 as standby. The Eth1/1 interface is configured with default priority. Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the Eth1/2 interface configuration for SW1. Not all code snippets are used.

Show Suggested Answer

Suggested Answer:

by JCGO at Dec. 7, 2023, 9:04 a.m.

Comments

Submit Cancel

elper

6 months, 2 weeks ago

lacp, active, 20000, max-bundle

upvoted 1 times

...

camelw

9 months, 1 week ago

It must be lacp port priority 20000 and rest is OK

upvoted 3 times

...

JCGO

11 months ago

Answer is incorrect. 2000 proority (1/2 will be active as it will have higher proirity). and min-links 1

upvoted 3 times

prospio971

9 months, 4 weeks ago

You're right for 2000 priority: value—Valid range is from 1 to 65535. The higher the number, the lower the priority. https://www.cisco.com/c/en/us/td/docs/ios/12_2sb/feature/guide/gigeth.html For min-links 1, it's not true: Device# configure terminal Device(config)# interface port-channel 2 Device(config-if)# port-channel min-links 3 Device(config-if)# lacp max-bundle 7 https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-10/configuration_guide/lyr2/b_1610_lyr2_9500_cg/configuring___etherchannels.html