Refer to the exhibit. An engineer must access a Cisco UCS C-Series server KVM from a remote location. The engineer must use the out-of-band interface to access the KYM. Which configuration set meets these requirements?
Why do you think Ethernet1/0/10 is connected to MGMT interface on the CIMC?
Option A:
NIC mode: Shared LOM - VLAN ID: 100 offers a better configuration as it allows the KVM traffic to traverse the shared LAN On Motherboard (LOM) interface and specifies VLAN ID 100 to segregate and manage the KVM traffic effectively, providing a secure and controlled environment for remote access.
When the NIC mode is set to "Dedicated," it means the network interface card (NIC) is solely used for out-of-band management traffic, which is ideal for accessing the KVM remotely.
However, with the VLAN state disabled, the KVM traffic will not be segregated into a specific VLAN, potentially leading to security and management challenges as the traffic won't be isolated.
It's not what's best. It's what's required from the question.
> It requires OOB, so it must use management interface.
> Plus, the neighbor device uses access mode, hence it does not require VLAN to be set.
It's correct:
Dedicated—A connection to the CIMC is available through the management Ethernet port or ports.
Shared LOM—A connection to the CIMC is available only through the LAN On Motherboard (LOM) Ethernet host ports.
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-1-1/b_Cisco_UCS_C-Series_Servers_Integrated_Management_Controller_Configuration_Guide_1_1_1/Cisco_UCS_C-Series_Servers_Integrated_Management_Controller_Configuration_Guide_1_1_1_chapter1.html
upvoted 1 times
...
This section is not available anymore. Please use the main Exam Page.350-601 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
DSAM9
3 months agoDSAM9
3 months ago8e29b9b
2 months, 4 weeks agoprospio971
10 months ago