Exam 350-601 topic 1 question 496 discussion

Actual exam question from Cisco's 350-601

Question #: 496
Topic #: 1

An engineer is implementing VSANs on a Cisco MDS 9000 Series Switch with a native Fibre Channel. The deployment must meet these requirements:
• The host on port fc1/1 must be assigned to VSAN 10.
• The port channel 10 ISL must pass multiple VSANs, including VSAN 10.

Which configuration set meets these requirements?

A. Activate VSAN 10 in the vFC interface.
Associate VSAN 10 to interface vfc 1/1.
Enable vsan F-port-channel-trunk on the ISL.
Set encapsulation EISL on the switch port.
B. Create VSAN 10 in the VSAN database.
Bind VSAN 10 to interface fc1/1 in the VSAN database.
Enable VSAN trunking on the ISL.
Allow VSAN 10 on the ISL.
C. Configure VSAN 10 in the interface configuration.
Attach VSAN 10 to the VSAN database.
Enable VSAN trunking on fc1/1.
Filter all VSAN on the ISL.
D. Disable VSAN 1 in the VSAN database.
Assign VSAN 10 to the ISL.
Enable VSAN trunking on the port channel members.
Permit VSAN 10 in the FLOGI database.

Show Suggested Answer

Suggested Answer: B 🗳️

by Eduardo7v at Oct. 28, 2024, 12:06 a.m.

Comments

Submit Cancel

Eduardo7v

6 months, 1 week ago

Option B is the correct answer**, as it clearly meets both requirements: Assigns VSAN 10 to fc1/1. Allows VSAN 10 and other VSANs on the ISL through trunking.

upvoted 1 times

...

Exam 350-601 All Questions

View all questions & answers for the 350-601 exam

Exam 350-601 topic 1 question 496 discussion

Comments

Eduardo7v

SY0-701