Exam 300-115 topic 5 question 344 discussion

Actual exam question from Cisco's 300-115

Question #: 344
Topic #: 5

[All 300-115 Questions]

When you configure a private VLAN, which type of port must you configure the gateway router port as?

A. promiscuous port
B. isolated port
C. community port
D. access port

Show Suggested Answer

Suggested Answer: Explanation 🗳️
There are mainly two types of ports in a Private VLAN: Promiscuous port (P-Port) and Host port. Host port further divides in two types Isolated port (I-Port) and

Community port (C-port). Promiscuous port (P-Port): The switch port connects to a router, firewall or other common gateway device. This port can communicate with anything else connected to the primary or any secondary VLAN. In other words, it is a type of a port that is allowed to send and receive frames from any other port on the VLAN.
Host Ports:

o Isolated Port (I-Port): Connects to the regular host that resides on isolated VLAN. This port communicates only with P-Ports. o Community Port (C-Port): Connects to the regular host that resides on community VLAN. This port communicates with P-Ports and ports on the same community VLAN.
Reference: http://en.wikipedia.org/wiki/Private_VLAN

by aadeeb at July 20, 2019, 4:19 p.m.

Comments

Submit Cancel

aadeeb

5 years, 11 months ago

A is the correct answer

upvoted 3 times

...