Exam 300-115 topic 5 question 345 discussion

Actual exam question from Cisco's 300-115

Question #: 345
Topic #: 5

After configuring new data VLANs 1020 through 1030 on the VTP server, a network engineer notices that none of the VTP clients are receiving the updates. What is the problem?

A. The VTP server must be reloaded.
B. The VTP version number must be set to version 3.
C. After each update to the VTP server, it takes up to 4 hours propagate.
D. VTP must be stopped and restarted on the server.
E. Another switch in the domain has a higher revision number than the server.

Show Suggested Answer

Suggested Answer: Explanation 🗳️
VTP version 3 supports these features that are not supported in version 1 or version 2:
Enhanced authentication--You can configure the authentication as hidden or secret. When hidden, the secret key from the password string is saved in the

VLAN database file, but it does not appear in plain text in the configuration. Instead, the key associated with the password is saved in hexadecimal format in the running configuration. You must reenter the password if you enter a takeover command in the domain. When you enter the secret keyword, you can directly configure the password secret key.
Support for extended range VLAN (VLANs 1006 to 4094) database propagation. VTP versions 1 and 2 propagate only VLANs 1 to 1005. If extended VLANs

are configured, you cannot convert from VTP version 3 to version 1 or 2.
Reference:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_52_se/config uration/guide/swvtp.html#wp1316856

by aadeeb at Aug. 4, 2019, 9:54 p.m.

Comments

Submit Cancel

aadeeb

5 years, 10 months ago

Answer is B

upvoted 4 times

...