Exam 350-601 All Questions

View all questions & answers for the 350-601 exam

Exam 350-601 topic 1 question 132 discussion

Actual exam question from Cisco's 350-601

Question #: 132
Topic #: 1

An engineer needs to monitor ingress traffic that arrives at interface Ethernet 1/3 that belongs to a Cisco Nexus 5600 Series Switch. The traffic analyzer machine located at interface Ethernet 1/5 is already monitoring other production, and the traffic analyzer must not be impacted by the traffic captured from the interface
Eth1/3. The operations team allocated a traffic budget for the new monitoring session of 1 Gbps to meet this requirement. Which set of commands configures the
SPAN session?
A.

B.

C.

D.

Show Suggested Answer

Suggested Answer: C
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/system_management/7x/b_5600_System_Mgmt_Config_7x/ b_6k_System_Mgmt_Config_7x_chapter_01110.html

by MaxG at Sept. 16, 2021, 12:01 a.m.

Comments

Submit Cancel

MaxG

Highly Voted 3 years, 4 months ago

So, there is actually no correct answer option. Answer should be: switch(config)# interface ethernet 1/5 switch(config-if)# switchport monitor rate-limit 1G switch(config)# monitor session 2 switch(config-monitor)# destination interface ethernet 1/5 switch(config-monitor)# source interface ethernet 1/3 rx

upvoted 13 times

SwitchKiller

2 years, 10 months ago

I think C is correct on the basis that Interface Ethernet 1/3 is a typo and it should really be 1/5

upvoted 2 times

mauchi

2 years, 9 months ago

yes, but still it would lack the rx on the source interface line

upvoted 2 times

...

udo2020

Most Recent 1 year ago

The answer C s correct because the command rate-limit 1G is configured on the source interface eth 1/3

upvoted 2 times

...

zhaorespimasid

1 year, 9 months ago

C is correct

upvoted 1 times

...

g_kuchima

2 years ago

No correct answer. switch(config)# interface ethernet 1/5 switch(config-if)# switchport monitor rate-limit 1G switch(config)# monitor session 2 switch(config-monitor)# destination interface ethernet 1/5 switch(config-monitor)# source interface ethernet 1/3 rx

upvoted 1 times

...

GuyThatTakesDumps

2 years, 4 months ago

C is the one

upvoted 1 times

...

alexshang

3 years, 3 months ago

Agree. Correct answer is not there.

upvoted 2 times

...

MaxG

3 years, 4 months ago

I think C is correct: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/system_management/7x/b_5600_System_Mgmt_Config_7x/b_6k_System_Mgmt_Config_7x_chapter_01110.html

upvoted 3 times

...