Exam 350-601 topic 1 question 51 discussion

Actual exam question from Cisco's 350-601

Question #: 51
Topic #: 1

An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth1/2 interfaces for both switches must be advertised via
OSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interfaces Eth1/1 on SW1 and Eth1/1 on SW2 must remain unaffected. Which configuration must be applied to both Nexus switches to meet these requirements?
A.

B.

C.

D.

Show Suggested Answer

Suggested Answer: C
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/unicast/configuration/guide/l3_cli_nxos/l3_ospf.html

by designated at Sept. 21, 2021, 6:39 p.m.

Comments

Submit Cancel

designated

Highly Voted 1 year, 7 months ago

C is correct (config-if)# ip ospf passive-interface > disables neighborship but still advertise the network only on interface ethernet 1/2 as the question asked.

upvoted 5 times

...