Exam 350-601 topic 1 question 317 discussion

Actual exam question from Cisco's 350-601

Question #: 317
Topic #: 1

An engineer is implementing traffic monitoring for a server vNIC that is configured with fabric failover enabled. The requirement is for the traffic to be sent to an analyzer, even during a failure of one of the fabric interconnects. The analyzer is connected to unconfigured Ethernet ports on both fabric interconnects. Which configuration accomplishes this task?

A. Create two traffic monitoring sessions with different names, one per fabric. Connect an analyzer on each FI as the destination for the monitoring session local to the FI.
B. Create two traffic monitoring sessions with the same name, one per fabric. Connect the analyzer connected to FI-A as the destination for both monitoring sessions.
C. Create two traffic monitoring sessions with different names, one per fabric. Connect the analyzer connected to FI-B as the destination for both monitoring sessions.
D. Create two traffic monitoring sessions with the same name, one per fabric. Connect an analyzer on each FI as the destination for the monitoring session local to that FI.

Show Suggested Answer

Suggested Answer: D 🗳️

by elmodude at Sept. 7, 2022, 1:57 a.m.

Comments

Submit Cancel

asd248402

8 months ago

Selected Answer: D

Add the vNIC as the traffic source using the exact same name for both sessions.

upvoted 1 times

...

wickkkkkkkkkkkkkkkkkk

9 months ago

i think A

upvoted 1 times

...

JesNet

1 year, 10 months ago

D Because a traffic monitoring destination is a single physical port, a traffic monitoring session can monitor only a single fabric. To monitor uninterrupted vNIC traffic across a fabric failover, create two sessions, one per fabric and connect two analyzers. Add the vNIC as the traffic source using the exact same name for both sessions.

upvoted 2 times

...

mish4

1 year, 10 months ago

Because a traffic monitoring destination is a single physical port, a traffic monitoring session can monitor only a single fabric. To monitor uninterrupted vNIC traffic across a fabric failover, create two sessions, one per fabric and connect two analyzers. Add the vNIC as the traffic source using the exact same name for both sessions. Answer: D

upvoted 2 times

...

GuyThatTakesDumps

2 years, 2 months ago

Selected Answer: D

D is correct!

upvoted 3 times

...

elmodude

2 years, 3 months ago

Selected Answer: D

Because a traffic monitoring destination is a single physical port, a traffic monitoring session can monitor only a single fabric. To monitor uninterrupted vNIC traffic across a fabric failover, create two sessions, one per fabric and connect two analyzers. https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/System-Monitoring/3-1/b_UCSM_CLI_System_Monitoring_Guide_3_1/b_UCSM_CLI_System_Monitoring_Guide_3_1_chapter_01101.html

upvoted 3 times

elmodude

2 years, 3 months ago

My bad. It's actually A. you need 2 sessions. Same reference link.

upvoted 1 times

elmodude

2 years, 3 months ago

Man, second guessing myself. It's D. 2 sessions but with the same name. Add the vNIC as the traffic source using the exact same name for both sessions.

upvoted 3 times

...