Suggested Answer:C🗳️
About N Port Identifier Virtualization N port identifier virtualization (NPIV) provides a means to assign multiple FC IDs to a single N port. This feature allows multiple applications on the N port to use different identifiers and allows access control, zoning, and port security to be implemented at the application level. Figure 1-1 shows an ex-ample application using NPIV.
Figure 1-1 NPIV Example - You must globally enable NPIV for all VSANs on the MDS switch to allow the NPIV-enabled applica-tions to use multiple N port identifiers. Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/int/nxos/cli_interfaces/npv.html
C is correct
You must globally enable NPIV for all VSANs on the MDS switch to allow the NPIV-enabled applications to use multiple N port identifiers.
reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/interfaces/nx-os/cli_interfaces/npv.html#34496
This section is not available anymore. Please use the main Exam Page.350-601 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
Mustafa
10 months, 1 week agoGuyThatTakesDumps
2 years, 7 months ago