ExamTopics Logo
Mail Us[email protected]
Menu
Cisco Discussions
exam questions

Exam 350-601 All Questions

View all questions & answers for the 350-601 exam
Go to Exam

Exam 350-601 topic 1 question 373 discussion

Actual exam question from Cisco's 350-601
Question #: 373
Topic #: 1
[All 350-601 Questions]

A network engineer connects the CNA interface of a server to a switch. The switch must bring down all of the VLANs on the interface that are not enabled for FCoE, but the VLANs that are enabled for FCoE should continue to carry SAN traffic without interruption. Which configuration should be applied to the switch to achieve this objective?

  • A. switch(config)# interface Ethernet 2/1
    switch(config-if)# shutdown force
  • B. switch(config)# interface Ethernet 2/1
    switch(config-if)# shutdown lan
  • C. switch(config)# interface Ethernet vfc 2
    switch(config-if)# shutdown force
  • D. switch(config)# interface vfc 2
    switch(config-if)# shutdown lan
Show Suggested Answer Hide Answer
Suggested Answer: B 🗳️
by JGBARRIO at Feb. 18, 2023, 10:04 a.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
ed27
6 months, 2 weeks ago
Selected Answer: B
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/FCoE/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_FCoE_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_FCoE_Configuration_Guide_7x_chapter_011.html#id_23689
upvoted 1 times
...
Gayan84
1 year, 7 months ago
The Answer is "B" The shutdown lan command is only configurable on port-channel interfaces, FEX HIF ports, or on individual Ethernet interfaces that vFC interfaces are bound upon. The shutdown lan command is only configurable on port-channel interfaces or on individual Ethernet interfaces that are in an operational trunking state. The shutdown lan command cannot be enabled on the secondary vPC leg, if the vPC enabled shutdown lan is applied on the secondary vPC leg. xamples of Shutdown LAN Traffic Shutdown the LAN traffic on port-channel. switch(config)#interface port-channel 955 switch(config-if)# shutdown lan Shutdown the LAN traffic on individual Ethernet port. switch(config)#interface Ethernet 2/5 switch(config-if)# shutdown lan
upvoted 3 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago